Large cantilever rolling gates and grand estate gates with heavy frames, masonry piers, automation and clean travel across wide drives and rough ground.
Estate gates carry weight and presence. A cantilever gate rolls on carriages supported from a single side, so nothing drags on the ground and the gate can cross uneven, muddy or snowy drives. Combined with brick or stone piers, steel frames and automation, these gates are a signature entry for farms, estates and large properties across Nashville and Middle Tennessee.
We begin with a Free Estimate and measure the opening, the run beside it and the grade. We design the gate frame, counterweight tail and carriage supports, plan footings for the large loads and coordinate masonry piers, lighting and operators. We explain space needs for the tail, how pickets and infill affect security and how sensors, backup power and manual release keep the gate safe and usable. Large gates need good planning on paper before concrete is poured. The tail, the footing size, the pier design and the operator all need to fit together, and we draw them up so you can see the layout. We also plan conduit for power, lighting and access control at the same time, which avoids digging up a new drive later.
Cantilever gates ride overhead on carriages, so they work on gravel, uneven or snowy drives.
The gate needs a counterweight section beside the opening, so planning room is important.
Large gates carry big loads, and we plan footings and piers to handle the weight and wind.
Gate frames, infill and finials can match the fence and the home, and access controls complete the system.
Opening, run and grade reviewed.
Frame, tail and infill planned.
Sized for the load.
Carriages set and aligned.
Sensors, power and access set.
Travel and release shown.
Every topic has its own page with what to expect and how we approach it.
ResourceD and D TechnologiesA maker of gate hardware, including self-closing hinges, latches, closers and pool gate safety hardware.Learn more ResourceNational HardwareA maker of builder and home hardware, including gate latches, hinges, hasps and fence accessories.Learn more 
Comparison guidePool Fence BarriersHow pool fences, gates and layers of protection work together to keep children and pets safe around the…Learn more Answer five questions about your property, goals and timing to see which fence services to start with.
You tell us what you want the fence to do, and we set a visit that fits your day.
We walk the line, measure runs and gates, note slope, trees and utilities and talk through your goals.
You receive a plain written scope with style, height, materials, gates and price before anything begins.
We stake the line, request utility marking where needed and set posts plumb and aligned.
We frame the fence, install pickets or panels and hang gates with strong hinges and latches.
We clean up, walk the fence with you, show how gates work and explain care.
The tail is usually about half the opening width beyond it. We measure your fence line.
Yes. Because it rides overhead, ground conditions matter less.
Large gates are heavy, so an operator is strongly recommended.
Yes. We build brick and stone piers and coordinate with the gate frame.
We plan frames, bracing and posts for wind loads and explain open or solid infill choices.
Sliding GatesSliding driveway gates on tracks or wheels that suit tight entries and sloped drives, with strong frames, operators…Explore 
Driveway GatesCustom driveway gates in steel, aluminum and wood, swing or slide, with strong posts, quality hardware and optional…Explore 
Stone and Brick Fence ColumnsStone and brick fence columns and piers that anchor iron panels and gates, frame driveway entries and add…Explore 
Automatic Gate OpenersAutomatic gate openers for swing and sliding gates with remotes, keypads, safety sensors, battery backup and solar options…Explore Tell us about your property and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
