Board-on-Board Fences in Nashville and Middle Tennessee
Wood Fences

Board-on-Board Fences

Board-on-board fences with overlapping pickets that stay private from every angle and look full and finished as the wood dries and moves.

A board-on-board fence overlaps pickets on alternating sides of the rails so there is no gap even when the wood shrinks. The result is full privacy from every angle, a fuller and more custom look and a fence that holds its appearance as boards dry and move. Owners in Nashville choose board-on-board when privacy matters most, beside pools, patios, busy streets or close neighbors.

We start with a Free Estimate and explain how the design works: a first row of pickets spaced apart, then a second row covering the gaps. We frame with a third rail for strength, set posts for the added weight and hang the pickets evenly on both sides. You see the cost difference compared with a standard privacy fence explained plainly, and we discuss caps and trim that give the fence a finished top edge. Because board-on-board uses more boards, it rewards good framing. Extra rails keep the pickets flat, careful spacing keeps the overlap even and a cap rail finishes the top. If you are weighing it against a standard privacy fence, we can set a small sample section next to a plain one on your estimate visit, so you see how much more solid the overlapping design feels in real light.

No gaps as wood dries

Overlap keeps the fence private even when boards shrink, which standard side-by-side pickets cannot always do.

Stronger framing

The added picket weight calls for good rails and well-set posts, so we plan the structure to match.

Both faces look finished

Because pickets alternate, each side has a neat appearance, which helps with neighbors and HOAs.

Cap and trim options

A cap rail and trim board give a crisp top and protect the end grain of the pickets.

What is included

  • Design comparison
  • Heavier-duty framing
  • Set posts
  • Alternating picket rows
  • Cap and trim
  • Cleanup and review
Before and after

See the transformation.

Drag the handle to compare.

After: a backyard fence with a brand new, straight cedar privacy fence with even pickets, square posts and neat capsBefore: a backyard fence with an old, leaning, weathered gray wood privacy fence with missing pickets, gaps and rotted postsBeforeAfter
A leaning, weathered gray backyard fence replaced with a straight new cedar privacy fence. From an old, leaning, weathered gray wood privacy fence with missing pickets, gaps and rotted posts to a brand new, straight cedar privacy fence with even pickets, square posts and neat caps.
Why it works

What you get with Board-on-Board Fences

Compare designs

Standard and board-on-board shown side by side.

Plan the structure

Rails, posts and spacing sized for the weight.

Set posts

Aligned and set for the load.

Hang the first row

Spaced evenly along the rails.

Add overlapping boards

Gaps covered on the second face.

Trim and review

Caps, lines and cleanup checked.

Try it now

Fence Length and Materials Calculator

Enter your measurements to see linear feet, posts, rails, pickets, concrete and time to plan for yards, runs, pastures and gates.

How it works

Our process, start to finish.

  1. 01

    Call and describe it

    You tell us what you want the fence to do, and we set a visit that fits your day.

  2. 02

    Walk and measure

    We walk the line, measure runs and gates, note slope, trees and utilities and talk through your goals.

  3. 03

    Plan and approve

    You receive a plain written scope with style, height, materials, gates and price before anything begins.

  4. 04

    Mark and set posts

    We stake the line, request utility marking where needed and set posts plumb and aligned.

  5. 05

    Build and hang

    We frame the fence, install pickets or panels and hang gates with strong hinges and latches.

  6. 06

    Walk through and review

    We clean up, walk the fence with you, show how gates work and explain care.

Questions

Board-on-Board Fences FAQ

Is board-on-board more expensive?

Yes, because it uses more pickets and takes more labor. Many owners feel the added privacy and look are worth it.

Does board-on-board last longer?

Overlap helps it stay private as wood moves, and good posts, rails and finishing drive true longevity.

Can I get it in cedar or treated pine?

Yes, either works. We discuss the look, budget and finish for each.

Is it good for wind?

Overlapping pickets let some air pass between rows, so it can handle wind better than a tight, solid panel. Post depth still matters.

Do both sides look the same?

Both sides show pickets, which makes it a good neighbor-friendly choice.

Next step

Get your Free Estimate for Board-on-Board Fences.

Tell us about your property and we will call you back to set up a visit.

Or call (615) 357-7797 to talk now.

Tell us about your property

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Estimate